The badassBox makes your e-bike much quicker in no time at all, mounted in just moments. Back on public roads, the badassBox can be removed in seconds. Your e-bike is, once again, legally in compliance with the regular speed limits.
Don’t be surprised at your speedometer: The badassBox freezes the value above a certain speed. Find out below why that is the case.
The badassBox Type3.3 Shimano Freeze is compatible with all Shimano mid-mounted motors with a Di2 shifting system. For an e-bike without Di2 you need the badassBox Shimano!
badassBox Shimano Freeze – version 3.3 with battery and cover, O-ring, Toolfree 5mm
The badassBox Shimano Freeze freezes the displayed speed depending on the wheel circumference above a certain value. It makes no difference to the motor whether it performs at full power in the lowest or highest gear. The badassBox does not affect the maximum power. The badassBox Shimano Freeze completely lifts the engine's support limit for pedelecs with Shimano drive and Di2 shifting.
The badassBox is powered by photo battery cells (type CR2) enabling it to perform over approx. 6000 km or one year (self-discharge) thanks to its low power technology. As the signal transmission takes place without an electrical contact (contactless chip tuning) electrical damage is physically impossible. The microprocessor switches on and off automatically. The battery is replaced simply by opening the base of the housing.
The badassBox type3.3 Shimano Freeze relies on the tried and tested series 3.3 housing with the electronics of the series 3.4. It is splash-proof and less sensitive to vibrations and impacts. These are only a few of many improvements that make the badassBox very reliable.
The badassBox is a quality product - every single device is inspected many times during production. Attention: The badassBox is only guaranteed to be genuine with the seal on the base of the housing!
We want you to be satisfied with the badassBox. At all times. Should this not be the case then please send us a mail to firstname.lastname@example.org or make use of our service form in the menu. We normally solve the problem on the same day.
All spare parts from the Typ3.3 model onwards are held in stock to ensure that you enjoy our product for a long time. However, should you be dissatisfied with the badassBox within the first 3 months of the purchase then we will reimburse you the purchase price. Immediately and no questions asked.
Please ensure there’s at least 15mm space between the sensor and the spokes. If it’s less, please add this adaptor plate to your order.
|Weight:||71g including battery|
|Special feature:||splash proof battery case, moulded electronics. Also works under water.|