badassBox Shimano – version 3.3 with battery and cover, O-ring, Toolfree 5mm
The badassebikes Chiptuning Box Typ3.3 is installed on the original Shimano speed sensor of the eBike. It is simply plugged in and secured with a rubber ring. The eBike is ready to use once the magnet has been repositioned on the bicycle spoke.
This allows the badassebikes Chiptuning Box Typ3.3 to halve the transmitted speed once approx. 18 km/h (depending on wheel circumference) has been reached. Steady support is provided to over 50 km/h.
The badassebikes Chiptuning Box Typ3.3 is powered by one battery (CR2), which provides an operational distance of approx. 5000 km thanks to the use of low-power technology. The microprocessor switches on and off automatically.
Upon reaching a public road network, simply open the rubber ring clip and remove the chiptuning box. It can be quickly and easily stowed away thanks to its small size: 56 mm x 47 mm x 23 mm, 71 grams. After repositioning the magnet in its original position (loosen screw, reposition, tighten screw), the eBike is ready to use and in its original condition.
After installation of the badassBox the magnet must be offset. The video shows this easy operation.
The video shows the Bosch sensor. The process is identical for the Shimano variant.
ATTENTION: First time use, please exchange the Phillips screw of the magnet against the badassBox provided toolfree screw. Then the displacement of the magnet is possible without requiring any tools.