badassBox for BOSCH motors

Attention, the badassBox 4 Bosch is only compatible with the sensor shown in this picture. Badass eBikes proudly presents: the new improved badassBox 4 Bosch The badassBox 4 is the result of more than a year's development. We have completely re-designed the casing, made it more streamline and replaced the o-ring of the previous version with our patented snap-lock fastening. Making it more streamline makes it even easier to fit. The new snap-lock fastening means you can attach and remove your badassBox with just one hand in seconds. At customer's request, we have additionally added an optional securing feature on the snap lock using a cable tie. The CR2 battery has been replaced with a AAA battery, so you can pick up replacement batteries much cheaper on just about any street corner. We recommend replacing the battery at least once a year at the start of the season. Due to our specially patented field enhancement technology FEET (Field Enhancement & Elimination Technology) you get very far with one battery. To protect against moisture and mechanical stress, the electronics are glued into the casing and completely sealed with a special casting compound. The badassBox is developed and manufactured exclusively by us in-house. Before and after casting we check each badassBox individually. Customer satisfaction and quality are our top priorities. If you have any questions, don't hesitate to ask – we'll get back to you with an answer straightaway, mostly on the same working day. Due to the high quality and our focus on customer satisfaction, we additionally offer a 1 month money-back guarantee. In a nutshell The badassBox is attached to the speed sensor of the e-bike and overrides the 25 km/h speed limit. Remove it and your e-bike is restored to its original state. Contactless e-bike tuning Streamlined, registered design for casing Patented snap-lock fastening Securing feature on the housing Patented field enhancement technology Auto industry potting compound Doubled quality control Made in Germany One month money-back guarantee Installation The badassBox 4 Bosch is fitted over the Bosch speed sensor next to the rear wheel. When the snap-lock clicks into position, the badassBox is fitted securely to the sensor. For extra secure fitting, the badassBox can also be fastened with a zip tie. Once the badassBox has been fitted onto the sensor, the spoke magnet must be offset to the casing edge in the direction of the snap-lock clasp. It's now ready for use. Following removal of the badassBox, the spoke magnet must be returned to its original position. .responsive-video { position: relative; padding-bottom: 56.25%; padding-top: 30px; height: 0; overflow: hidden; } .responsive-video iframe { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } How it works The contactless and wireless badassBox transmits a modified signal in order to override the speed limit of your e-bike – without interfering with the motor's electronic circuitry or software. There's no need to open the motor and there is no risk of damaging it. The badassBox can be fitted in seconds – and just as quickly removed, restoring your e-bike to its former road-legal condition. For all these advantages, a wrong speed, and values derived from it, are displayed. We recommend the use of GPS-related accessories for a more precise data acquisition of driving data (smartphone, bike computer, etc.). Technical data Dimensions   61 x 43 x 15 mm Weight badassBox 27 g including battery 37 g Battery 1.5 V AAA battery (IEC R03)

Attention, you only need this set if the Bosch Slim sensor is attached to the chain stay using the original adapter (first picture) or is integrated in the dropout of your bike (second picture). If the Bosch sensor (third picture) is mounted on your chain stay and is easily accessible, you only need one badassBox 4 Bosch. Badass eBikes proudly presents: the new badassBox 4 Bosch Slim-Set The badassBox 4 Bosch Slim set includes all the parts you need to mount the badassBox 4 on your e-bike with Bosch mid-motor and the Bosch Slim sensor: badassBox 4 Bosch Bosch Slim-Adapter With the badassBox 4 Bosch Slim set, you not only have all the parts you need to tune up your bike at the click of a button, but also save money at the same time. Installation The Bosch Slim Sensor is either mounted on the chain stay or integrated into the dropout. Here the slim speed sensor is classically mounted on the chain stay with an adapter. There, the sensor must be freed from the adapter, the original adapter is unscrewed and replaced by our adapter. Here the slim speed sensor is integrated near the rear axle. First, the rear wheel must be removed. Then the sensor is removed from the bracket and mounted with our adapter at a suitable place on the chain stay using cable ties.

Attention, you need this set only if the Bosch Sensor (first picture) is integrated in the dropout of your bike. If the integrated sensor looks like the one in the second picture, then it is the G4 Speed Sensor and you need the badassBox 4 Bosch G4-Set. If the Bosch Sensor (first picture) is mounted easily accessible on your chainstay, you only need a badassBox 4 Bosch. Badass eBikes proudly presents: The new badassBox 4 Bosch X-Set The badassBox 4 Bosch X-Set includes all the parts you need to mount the badassBox 4 on your e-bike with a Bosch mid-mounted motor and Bosch Sensor integrated in the dropout: badassBox 4 Bosch Universal Adapter Spoke magnet with thumb screw With the badassBox 4 Bosch X-Set you not only get all the necessary parts to tune your e-bike in one 'click', but you also save money. Installation The integrated Bosch Sensor is located in the area of the dropout. To get to the sensor you have to dismount the rear wheel. Find the position of the integrated sensor* in the dropout of your e-bike. *The sensor shape shown is an example. Undo the screws of the bracket that holds the sensor* is fastened to the dropout. *The sensor shape shown is an example. Fasten the Universal Adapter with cylinder head screw, washer and nut (included in delivery) to the Bosch Sensor*. *The sensor shape shown is an example. Now you can attach the Universal Adapter with mounted Bosch Sensor* on the chainstay with supplied cable ties. *The sensor shape shown is an example. Slide the badassBox onto the adapter until it clicks into place. Reinstall the rear wheel. Mount the spoke magnet and align it with the edge of the badassBox housing. That's it. Have fun with your faster e-bike!

Attention, you only need this set if the Bosch Slim sensor is attached to the chain stay using the original adapter (first picture) or is integrated in the dropout of your bike (second picture). If the Bosch sensor (third picture) is mounted on your chain stay and is easily accessible, you only need one badassBox 4 Bosch. Badass eBikes proudly presents: the new badassBox 4 Bosch Slim-Set The badassBox 4 Bosch Slim set includes all the parts you need to mount the badassBox 4 on your e-bike with Bosch mid-motor and the Bosch Slim sensor: badassBox 4 Bosch Bosch Slim-Adapter With the badassBox 4 Bosch Slim set, you not only have all the parts you need to tune up your bike at the click of a button, but also save money at the same time. Installation The Bosch Slim Sensor is either mounted on the chain stay or integrated into the dropout. Here the slim speed sensor is classically mounted on the chain stay with an adapter. There, the sensor must be freed from the adapter, the original adapter is unscrewed and replaced by our adapter. Here the slim speed sensor is integrated near the rear axle. First, the rear wheel must be removed. Then the sensor is removed from the bracket and mounted with our adapter at a suitable place on the chain stay using cable ties.

Attention, only the G4 Speed Sensor (first picture) is compatible with this set If the integrated (in dropout) sensor has the shape of the sensor in the second picture (Bosch Sensor), then you need the badassBox 4 Bosch X-Set If the Bosch Sensor (second picture) is mounted easily accessible on your chainstay, you only need a badassBox 4 Bosch. Badass eBikes proudly presents: Das neue badassBox 4 Bosch G4-Set The badassBox 4 Bosch G4-Set includes all the parts you need to mount the badassBox 4 on your Trek e-bike with Bosch, Fazua or TQ mid-mounted motor and integrated G4 speed sensor: badassBox 4 Bosch G4 Adapter Spoke Magnet with Thumb Screw With the badassBox 4 Bosch X-Set you not only get all the necessary parts to tune your e-bike in one 'click', but you also save money. Installation The integrated Bosch Sensor is located in the area of the dropout. To get to the sensor you have to dismount the rear wheel. With the included button head screw you can screw (for this you need a 2.5 mm Allen key) the G4 speed sensor to the G4 adapter (1). (2) A suitably cut pad made of self-adhesive elastic foam is included as an option. This pad can be glued to the G4 adapter to attach it to the chain stay without the risk of scratches. With the enclosed cable ties (3), you can mount the G4 adapter including screwed G4 speed sensor at a suitable location on the chain stay (4), where it is possible to slide the badassBox over the adapter. Slide the badassBox onto the adapter until it clicks into place. Reinstall the rear wheel. Mount the spoke magnet and align it with the edge of the badassBox housing. That's it. Have fun with your faster e-bike!