We are currently rebuilding our web-store and temporary problems may occur. Please contact service@badassebikes.com if you require help.
tested quality
many years' experience

badassBox 4 Bosch

Product information "badassBox 4 Bosch"

Badass eBikes proudly presents: the new improved badassBox 4 Bosch

The badassBox 4 is the result of more than a year's development. We have completely re-designed the casing, made it more streamline and replaced the o-ring of the previous version with our patented snap-lock fastening. Making it more streamline makes it even easier to fit. The new snap-lock fastening means you can attach and remove your badassBox with just one hand in seconds. At customer's request, we have additionally added an optional securing feature on the snap lock using a cable tie.

The CR2 battery has been replaced with a AAA battery, so you can pick up replacement batteries much cheaper on just about any street corner. Tool-free battery change can be carried out quickly and easily while you're on the road – but should only be necessary once a year, or every 7000km. This was made possible by our in-house developed and patented field amplification technology FEET (Field Enhancement & Elimination Technology). To protect against moisture and mechanical stress, the electronics are glued into the casing and completely sealed with a special casting compound.

The badassBox is developed and manufactured exclusively by us in-house. Before and after casting we check each badassBox individually. Customer satisfaction and quality are our top priorities. If you have any questions, don't hesitate to ask – we'll get back to you with an answer straightaway, mostly on the same working day. Due to the high quality and our focus on customer satisfaction, we additionally offer a 1 month money-back guarantee.

In a nutshell

The badassBox is attached to the speed sensor of the e-bike and overrides the 25km/h speed limit. Remove it and your e-bike is restored to its original state.

  • Contactless e-bike tuning
  • Streamlined, registered design for casing
  • Patented snap-lock fastening
  • Securing feature on the housing
  • Patented field enhancement technology
  • AAA battery for range in excess of 7,000km
  • Auto industry potting compound
  • Doubled quality control
  • Made in Germany
  • One month money-back guarantee

Installation

The badassBox 4 Bosch is fitted over the Bosch speed sensor next to the rear wheel. When the snap-lock clicks into position, the badassBox is fitted securely to the sensor.

 For extra secure fitting, the badassBox can also be fastened with a zip tie.

Once the badassBox has been fitted onto the sensor, the spoke magnet must be offset to the casing edge in the direction of the snap-lock clasp. It's now ready for use.

Following removal of the badassBox, the spoke magnet must be returned to its original position.

How it works

The contactless and wireless badassBox transmits a modified signal in order to override the speed limit of your e-bike – without interfering with the motor's electronic circuitry or software. There's no need to open the motor and there is no risk of damaging it. The badassBox can be fitted in seconds – and just as quickly removed, restoring your e-bike to its former road-legal condition.

For all these advantages, a wrong speed, and values derived from it, are displayed. We recommend the use of GPS-related accessories for a more precise data acquisition of driving data (smartphone, bike computer, etc.).

Technical data

Dimensions
61 x 43 x 15 mm
Weight
badassBox 27g
including battery 37gg
Battery
1.5V AAA battery (IEC R03)

Spare parts

Housing cover badassBox 4
Replacement part for badassBox 4The cover fits on all version 4 badassBoxes. The snap locks provide a secure hold.

€9.65*

Spoke Magnet with Thumb Screw
The high-quality and universal spoke magnet by Badass eBikes is suitable for all e-bikes. The Badass eBikes spoke magnet is supplied with a matching thumb screw for easy and tool-free installation within seconds.

€9.65*

Thumb Screw 4mm
The stainless steel screw is solid and has a nonslip surface with a nut in the screw cap that prevents sliding when tightening and loosening the screw. The thumb screw replaces the cross-slot screw of the magnet. Now the magnet can be adjusted without tools. Suitable for Bosch, Brose, Conti and Kalkhoff systems.

€1.17*

Accessories

Adapter plate 10 mm
The adapter plate is attached between the rocker and the sensor. It relocates the sensor outwards by 10 mm. We recommend mounting the adapter plate when the badassBox rubs against the spokes. This ensures that the badassBox maintains its full functionality. The adapter has absolutely no effect on the dismounting or mounting of the badassBox. Extra wide offset. Only needed for special purposes. Usually the 5 mm adapter is sufficient.

€8.68*

Adapter plate 5 mm
The adapter plate is attached between the rocker and the sensor. It relocates the sensor outwards by 5 mm. We recommend mounting the adapter plate when the badassBox rubs against the spokes. This ensures that the badassBox maintains its full functionality. The adapter has absolutely no effect on the dismounting or mounting of the badassBox. This adapter will be needed if the distance between sensor and spokes is less than 15 mm.

€8.90*

Conti Sensor
The Conti Sensor replaces incompatible original sensors so that the badassBox can be used.

€28.27*

CS Adapter
The Badass CS adapter allows the mounting of the pin-shaped sensors, which are used e.g. for Flyer with Panasonic motors or Bulls with Brose motors, so that the badassBox Brose can be used.

€12.57*

Housing cover badassBox 4
Replacement part for badassBox 4The cover fits on all version 4 badassBoxes. The snap locks provide a secure hold.

€9.65*

Housing cover Type3.3 46mm
Original housing cover with the badass eBikes logo and click closure. Suitable for all badassBoxes Type3.3 with 46mm.

€7.70*

Housing cover Type3.4
Original housing cover with the badass eBikes logo and click closure. Suitable for all badassBoxes Type3.4.

€7.70*

O-Ring
badass O-rings made of high-quality EPDM 70 plastic are particularly tear-resistant and UV-resistant. The O-ring secures the badassBox against slipping off the sensor.

€1.07*

Sensor Type Bosch
The sensor has the shape of the Bosch sensor and is electrically compatible with many e-bikes from different manufacturers. It is soldered to the motor cable instead of the original sensor.

€21.45*

Shimano SM-DUE10 540mm
Original - unlike last holiday's Rolex The Shimano SM-DUE10 is a speed sensor for the Shimano Steps e-bike platform.

€34.07*

Spoke Magnet with Thumb Screw
The high-quality and universal spoke magnet by Badass eBikes is suitable for all e-bikes. The Badass eBikes spoke magnet is supplied with a matching thumb screw for easy and tool-free installation within seconds.

€9.65*

Thumb Screw 4mm
The stainless steel screw is solid and has a nonslip surface with a nut in the screw cap that prevents sliding when tightening and loosening the screw. The thumb screw replaces the cross-slot screw of the magnet. Now the magnet can be adjusted without tools. Suitable for Bosch, Brose, Conti and Kalkhoff systems.

€1.17*

Thumb Screw 5mm
The stainless steel screw is solid and has a nonslip surface with a nut in the screw cap that prevents sliding when tightening and loosening the screw. This ensures that the badassBox is quickly mounted and dismounted without using any tools. The thumb screw replaces the screw of the magnet. Now the magnet can be adjusted without tools. Suitable for all standard magnets from Shimano.

€1.17*

Turbo Levo 2019 Adapter
E-Bike tuning for the Turbo Levo model year 2019 The Badass Turbo Levo 2019 Adapter for 2019 Turbo Levo and 2020 Turbo Creo by Specialized with new sensor in the fork-end. Cheaper and all-inclusive in the badassBox 4 Specialized-Set Turbo Levo 2019 The assembly requires a small conversion. Please read the instructions before ordering!

€12.57*

Universal Mount
The universal mount is an adapter plate which can be mounted with cable ties to any swinging arm. The adapter plate has a recess for a M5 nut for mounting the sensor. The universal mount is fastened with the inset nut and the cable ties provided to the swinging arm. Please note that an additional spoke magnet is often required.

€5.90*

Trailbells

Swisstrailbell Black-Enzian
The Swisstrailbell can be quickly, easily and securely attached to the handlebars of the e-bike. It has a pleasant ring tone that even older pedestrians can still hear clearly from a distance. This takes the horror out of the encounter and, in our opinion, is the best compromise between necessary warning and low noise pollution. Swisstrailbell is produced in Switzerland with social commitment. It has a magnet sewn into a fabric band to switch the bell function on/off. In the ringing position, the fabric tape is attached to its own handlebar holder using Velcro. To mute, the magnet can either be cut down briefly or inserted between the clapper and the bell wall, e.g. for rough off-road use. It is the ideal addition for any considerate rider.

€27.29*

Swisstrailbell Black-Flowers
The Swisstrailbell can be quickly, easily and securely attached to the handlebars of the e-bike. It has a pleasant ring tone that even older pedestrians can still hear clearly from a distance. This takes the horror out of the encounter and, in our opinion, is the best compromise between necessary warning and low noise pollution. Swisstrailbell is produced in Switzerland with social commitment. It has a magnet sewn into a fabric band to switch the bell function on/off. In the ringing position, the fabric tape is attached to its own handlebar holder using Velcro. To mute, the magnet can either be cut down briefly or inserted between the clapper and the bell wall, e.g. for rough off-road use. It is the ideal addition for any considerate rider.

€27.29*

Swisstrailbell Black-MTB
The Swisstrailbell can be quickly, easily and securely attached to the handlebars of the e-bike. It has a pleasant ring tone that even older pedestrians can still hear clearly from a distance. This takes the horror out of the encounter and, in our opinion, is the best compromise between necessary warning and low noise pollution. Swisstrailbell is produced in Switzerland with social commitment. It has a magnet sewn into a fabric band to switch the bell function on/off. In the ringing position, the fabric tape is attached to its own handlebar holder using Velcro. To mute, the magnet can either be cut down briefly or inserted between the clapper and the bell wall, e.g. for rough off-road use. It is the ideal addition for any considerate rider.

€27.29*

Swisstrailbell Brass-Blank
The Swisstrailbell can be quickly, easily and securely attached to the handlebars of the e-bike. It has a pleasant ring tone that even older pedestrians can still hear clearly from a distance. This takes the horror out of the encounter and, in our opinion, is the best compromise between necessary warning and low noise pollution. Swisstrailbell is produced in Switzerland with social commitment. It has a magnet sewn into a fabric band to switch the bell function on/off. In the ringing position, the fabric tape is attached to its own handlebar holder using Velcro. To mute, the magnet can either be cut down briefly or inserted between the clapper and the bell wall, e.g. for rough off-road use. It is the ideal addition for any considerate rider.

€27.29*

Swisstrailbell Brass-Flowers
The Swisstrailbell can be quickly, easily and securely attached to the handlebars of the e-bike. It has a pleasant ring tone that even older pedestrians can still hear clearly from a distance. This takes the horror out of the encounter and, in our opinion, is the best compromise between necessary warning and low noise pollution. Swisstrailbell is produced in Switzerland with social commitment. It has a magnet sewn into a fabric band to switch the bell function on/off. In the ringing position, the fabric tape is attached to its own handlebar holder using Velcro. To mute, the magnet can either be cut down briefly or inserted between the clapper and the bell wall, e.g. for rough off-road use. It is the ideal addition for any considerate rider.

€27.29*

Swisstrailbell Green-MTB
The Swisstrailbell can be quickly, easily and securely attached to the handlebars of the e-bike. It has a pleasant ring tone that even older pedestrians can still hear clearly from a distance. This takes the horror out of the encounter and, in our opinion, is the best compromise between necessary warning and low noise pollution. Swisstrailbell is produced in Switzerland with social commitment. It has a magnet sewn into a fabric band to switch the bell function on/off. In the ringing position, the fabric tape is attached to its own handlebar holder using Velcro. To mute, the magnet can either be cut down briefly or inserted between the clapper and the bell wall, e.g. for rough off-road use. It is the ideal addition for any considerate rider.

€27.29*

Swisstrailbell Red-Edelweiss
The Swisstrailbell can be quickly, easily and securely attached to the handlebars of the e-bike. It has a pleasant ring tone that even older pedestrians can still hear clearly from a distance. This takes the horror out of the encounter and, in our opinion, is the best compromise between necessary warning and low noise pollution. Swisstrailbell is produced in Switzerland with social commitment. It has a magnet sewn into a fabric band to switch the bell function on/off. In the ringing position, the fabric tape is attached to its own handlebar holder using Velcro. To mute, the magnet can either be cut down briefly or inserted between the clapper and the bell wall, e.g. for rough off-road use. It is the ideal addition for any considerate rider.

€27.29*

Swisstrailbell Red-Flowers
The Swisstrailbell can be quickly, easily and securely attached to the handlebars of the e-bike. It has a pleasant ring tone that even older pedestrians can still hear clearly from a distance. This takes the horror out of the encounter and, in our opinion, is the best compromise between necessary warning and low noise pollution. Swisstrailbell is produced in Switzerland with social commitment. It has a magnet sewn into a fabric band to switch the bell function on/off. In the ringing position, the fabric tape is attached to its own handlebar holder using Velcro. To mute, the magnet can either be cut down briefly or inserted between the clapper and the bell wall, e.g. for rough off-road use. It is the ideal addition for any considerate rider.

€27.29*

Swisstrailbell Red-MTB
The Swisstrailbell can be quickly, easily and securely attached to the handlebars of the e-bike. It has a pleasant ring tone that even older pedestrians can still hear clearly from a distance. This takes the horror out of the encounter and, in our opinion, is the best compromise between necessary warning and low noise pollution. Swisstrailbell is produced in Switzerland with social commitment. It has a magnet sewn into a fabric band to switch the bell function on/off. In the ringing position, the fabric tape is attached to its own handlebar holder using Velcro. To mute, the magnet can either be cut down briefly or inserted between the clapper and the bell wall, e.g. for rough off-road use. It is the ideal addition for any considerate rider.

€27.29*

Swisstrailbell Red-Switzerland
The Swisstrailbell can be quickly, easily and securely attached to the handlebars of the e-bike. It has a pleasant ring tone that even older pedestrians can still hear clearly from a distance. This takes the horror out of the encounter and, in our opinion, is the best compromise between necessary warning and low noise pollution. Swisstrailbell is produced in Switzerland with social commitment. It has a magnet sewn into a fabric band to switch the bell function on/off. In the ringing position, the fabric tape is attached to its own handlebar holder using Velcro. To mute, the magnet can either be cut down briefly or inserted between the clapper and the bell wall, e.g. for rough off-road use. It is the ideal addition for any considerate rider.

€27.29*

Swisstrailbell White-MTB
The Swisstrailbell can be quickly, easily and securely attached to the handlebars of the e-bike. It has a pleasant ring tone that even older pedestrians can still hear clearly from a distance. This takes the horror out of the encounter and, in our opinion, is the best compromise between necessary warning and low noise pollution. Swisstrailbell is produced in Switzerland with social commitment. It has a magnet sewn into a fabric band to switch the bell function on/off. In the ringing position, the fabric tape is attached to its own handlebar holder using Velcro. To mute, the magnet can either be cut down briefly or inserted between the clapper and the bell wall, e.g. for rough off-road use. It is the ideal addition for any considerate rider.

€27.29*

Maintenance

Lezyne CO2 Pump head Control Drive CNC
CNC milled aluminum dispenser with brass components. CNC knob for easy and controlled inflation. The double valve head fits Presta and Schrader valves. The neoprene cover protects the hand during the discharge from the cold. Only compatible with threaded CO2 cartridges. Description with hardened stainless steel pin for piercing the cartridge Slip fit valve for Presta and Schrader valves compatible with all cartridges with thread with turret valve for precise inflation .responsive-video { position: relative; padding-bottom: 56.25%; padding-top: 30px; height: 0; overflow: hidden; } .responsive-video iframe { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

€24.32*

Lezyne Minipump CNC Drive HV
Pump up the volume Compact, lightweight hand pump with efficient, overlapping composite matrix handle. Cylinder and piston made of CNC machined aluminium, optimised for high pressure applications. Equipped with ABS flex hose; Presta and Shrader valve compatible. Includes lightweight composite matrix frame holder.

€26.27*

Lezyne Minipump CNC Pressure Drive
Lightweight, CNC machined aluminum construction. Efficient and ergonomic overlapping design optimized for high pressure applications. Equipped with Presta and Schrader valve compatible ABS Flex Hose with integrated valve core tool. Includes a composite matrix frame pump mount.

€38.94*

Lezyne Minipump CNC Pressure Drive CFH
Versatile design combines the efficiency of a hand pump with the convenience of CO2. Innovative 2-in-1 inflation system works as a high pressure hand pump or CO2 inflator. Integrated steel-braided CO2 Flex Hose (CFH) doubles as a CO2 dispenser. Pump features a CNC machined aluminum body, piston and handle. Flip-Thread Chuck works on both Presta and Schrader valves. Kit includes: Pump with integrated CFH hose, one 16g cartridge and CFH mounting hardware. Adaptable configuration conveniently mounts to frame or slides into jersey pocket. Compatible with threaded CO2 only.

€48.69*

Lezyne Multitool RAP6
The size of Trump's brain Small tool for great deeds. The RAP6 is extremely robust and super lightweight. Ergonomic forged aluminum side plates. Forged, wrapped Center-Pivot CrV+ anti-corrosion bits. Chrome Vanadium steel fastening hardware.

€14.57*

Lezyne Multitool V-11
Low profile multi-tools optimized for modern component groups. CNC machined aluminum side plates. Forged, Center-Pivot CrV+ anti-corrosion bits. Chrome Vanadium steel fastening hardware.

€36.02*

Lezyne Multitool V-16
Low profile multi-tools optimized for modern component groups. CNC machined aluminum side plates. Forged, Center-Pivot CrV+ anti-corrosion bits. Chrome Vanadium steel fastening hardware.

€38.94*

Lezyne Multitool V-7
Low profile multi-tools optimized for modern component groups. CNC machined aluminum side plates. Forged, Center-Pivot CrV+ anti-corrosion bits. Chrome Vanadium steel fastening hardware.

€19.45*

Lezyne Tire Lever Power Lever
Strong, fiber reinforced Composite Matrix material. Aggressive hook geometry makes tire removal easy. Comfortable, wide handle design with integrated spoke hook.

€4.34*

Topeak Alien S Tool Kit
Mars Attacks! The ALiEN is back with a new face! Strictly limited edition of the professional tool for maintenance, repair and outdoor adventure, equipped with 25 high-quality stainless steel tools. Easy access to all tools through two-piece design and individually adjustable preload of the tools. Includes nylon bag. *Chain rivet compatible with single and multi-speed chains up to 12-speed. NOT compatible with Campagnolo® 11-speed hollow pin chains. *Tire lifter designed for emergency use only.

€68.19*

Topeak MicroShock Tiny Suspension Pump
The lightest and most compact damper pump in the world! Its housing, optimized in length and diameter, is designed for pressures up to 300 psi/20.7 bar. Due to its super flat design and compact size, it fits in every jersey pocket and backpack. Can also be mounted under a bottle holder with the included holder.

€22.37*

Topeak Rescue Box
Professional set of self-adhesive patches in a compact and water-repellent aluminium case. The pocket for a chain lock and two rivet pins as well as the six self-adhesive patches allow flat tyres and chain tears to be repaired in no time at all.

€7.75*

Tunap E-bike chain oil
Really greasy E-bike chain oil, especially suitable for e-bike drives Description High lubricity Optimal for high starting torques, wear protection even with the highest loads Special adhesive additive prevents the fast spinning off of the oil Maximum load carrying capacity, high creep and adhesion Easy application through brush attachment Reduces friction and corrosion Ensures a smooth and quiet running chain Suitable for chain, cassette and chainrings Application: Thoroughly clean the chain of old oil residues and dry with a cloth. Shake the chain oil vigorously (10-15 seconds), place the brush on the chain. Press the spray head and turn the cranks backwards until the chain has run through completely. Repeat the action so that the whole chain is moistened with enough chain oil. Rub the chain with a cloth and remove excess oil.

€10.67*

Tunap E-Bike Cleaner
Super shiny E-Bike Cleaner, applicable for all common frame materials Description Reduces conductivity, protects the contact points and does not attack any seals Removes dust, oil films and stubborn dirt The special formula with so-called "adhesive claws" in the liquid, remains visibly attached to the soiled areas and thus has a very intensive effect Biodegradable, without allergenic fragrances Application: Flush off rough dirt using plenty of water. Spray frame and all parts (incl. motor and battery housing) with the E-Bike cleaner. Allow to take effect for at least 5 minutes. Do not allow bicycle cleaner to dry and do not use on heated surfaces. Finally, flush off the bike thoroughly with water Responsibility towards humans and environment.

€16.52*

Tunap Multifunctional Oil
The multi oil is a cleaner, corrosion protection, rust remover, lubricant and contact spray at the same time Description Removes light rust and displaces moisture Lubricates Bearing or Attenuation Joints Does not attack paint, gaskets, plastics or rubber Creep-capable, low-viscosity lubricating film - very productive Free of silicone and / or solid lubricants such as PTFE or graphite Application: Thoroughly clean affected parts. Spray the parts sufficiently with the multifunctional oil and leave to work. Then remove rust or dirt with a cloth or brush. Wipe off excess oil with a soft cloth.

€9.70*

Bike accessories

Badass Carbon Bottlecage
The Badass bottle holder is made of carbon, so it has not only a nice design but also a low weight. Due to the special shape of the bottle holder, your bottle will fit ideally and will hold even under difficult conditions.

€24.32*

Camelbak Podium Chill Dirt Series Thermo Bottle
The insulation keeps your drink cold twice longer and the integrated mud cap keeps your mouthpiece clean. The innovative, self-sealing Jet Valve technology prevents leakage and dripping. Description redesigned "Jet Valve": larger valve diameter for more fluid flow Protective cap over the mouthpiece Lockout for leak-proof transport antibacterial by HydroGuard™ Trutaste: Polypropylene guarantees absolute taste neutrality slim bottle design multi-part lid for optimum cleaning Double-wall insulation keeps liquids twice as cold as conventional bottles guaranteed without harmful BPA, BPS, BPF

€19.45*

Ciclo Protos 105 Bike Computer
Are you looking for a bike computer that allows you to commute to the office every day or spontaneously go for a ride in the forest in the evening? The Protos 105 was developed for exactly these purposes. Many recreational cyclists and commuters are mainly interested in the distances they have covered and how fast they have been riding. With the wired Protos 105, you can display the ride time, kilometers traveled, and time on a clear 4-line display. Thanks to the intelligent logic of the display, the Protos 105 always shows you exactly the functions you need. In addition, the Protos 105 also features an enormous battery life of up to two years. Description Cabled bike computer Long battery life 4-line display Intelligent display logic

€19.40*

Elite Nanogelite Thermo Bottle
NANOGELITE is the lightest squeezable thermos bottle in the world weighing just 160g. It is able to combine high thermal performance with great flexibility, a feature that makes a difference to traditional thermoses, which are usually extremely stiff. Descriptiom Double wall structure with insulation panel made of Nanogel® Soft, easy-to-squeeze bottle for maximum fluid delivery Large, easy-to-clean valve with high flow rate BPA free

€22.91*

Helmetor helmet holder
Helmetor is a lightweight device specifically for helmets, that attaches to any flat surface - at home, school, cafe, workplace or even in a vehicle. Works with any vented helmet which has an air vent between 30-65 mm long. Description A great way to 'air' your helmets post-ride! Can allow for stowing Gloves etc inside the helmet! Using a standard shackle lock through the specially designed aperture (one too large to fit through the air vent), helmets can be locked securely onto Helmetor Weight: 31.8 g Excellent resistance to 'creep' i.e. its ability to keep returning to its original form. Very Good UV resistance. Capable of 1,000’s of repetitions without failure. A perfect balance between strength and flexibility. Matt finished injection moulded body. Compression moulded silicone logo insert. Colors: Green, Grey, Blue, Pink; Sale is sorted. .responsive-video { position: relative; padding-bottom: 56.25%; padding-top: 30px; height: 0; overflow: hidden; } .responsive-video iframe { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

€10.63*

Lezyne Saddle Bag Caddy L
Large capacity, wedge-shaped saddle bag. Velcro straps attach to saddle rails and seat post. Durable woven nylon construction. Large main compartment with labeled organizational pockets. Sub compartment for multi-tool or mobile device. Reflective logos and loop increases night visibility. Water resistant zipper with large pull loop. Description Velcro straps allow attachment to the saddle struts and seat post Main compartment offers space for repair kit and money Lower pocket accommodates multi tools or a mobile phone

€26.27*

Lezyne Saddle Bag Caddy M
Carry your essentials Medium, wedge-shaped saddle bag. Velcro straps attach to saddle rails and seat posts. Durable woven nylon construction. Labeled internal organizational pockets. External, quick access multi-tool sleeve. Reflective logos and loop increases night visibility. Water resistant zipper with large pull loop. Description Velcro straps allow attachment to the saddle struts and seat post Main compartment offers space for repair kit and money Outside pocket offers space for a medium sized tool

€21.40*

Lezyne Saddle Bag Caddy S
Small, wedge-shaped saddle bag. Velcro straps attach to saddle rails and seat post. Durable woven nylon construction. Labeled internal organizational pockets. External, quick access multi-tool sleeve. Reflective logos and loop increases night visibility. Water resistant zipper with large pull loop. Description Velcro straps allow attachment to the saddle struts and seat post Main compartment offers space for repair kit and money Outside pocket offers space for a small sized tool

€15.55*

Lezyne toptube organizer Energy Caddy XL
Large, simple toptube organizer for quick on-bike access to yummy snacks or little trinkets. Water resistant, zippered main compartment with side sleeves. Large enough to hold smartphones. Durable, high quality materials. Reflective features for added safety. Description Suitable for smartphones, energy bars etc. Velcro enclosure Three Velcro straps for secure attachment to the top / down tube

€29.20*

Voxom Bottle F5
Magnetic Magic The Fidlock magnetic holder technology is unique in the world and enables easy integration into tight bicycle frames, especially e-bikes. The magnets pull the bottle by itself into the holder and the snap hooks allow a firm connection of the bottle with the bicycle frame. The F5 can be removed easily to the side. Description Fidlock system TWIST Detaches automatically, magnetically Designed for very tight bike frames Large mouthpiece for high flow Large opening for easy filling and cleaning

€34.07*

€145.25*

delivery time Available immediately, delivery time approx. 1-2 working days*

Manufacturer: Badass eBikes GmbH
EAN: 4260475460822
ID: 1042


E-Bike tuning with the badassBox for pedelecs with Bosch motor

Our newest and best e-bike tuning for all Bosch mid-mounted drives incl. 4th generation/2020. New streamlined casing with patented snap-lock fastening for even faster mounting and release. Even more robust thanks to a special potting compound from the automotive industry. New electronics for even greater range with a single AAA battery.

A quality product designed and manufactured by us in Germany.


Scope of delivery

badassBox 4 Bosch with AAA battery and thumb screw

Please note that the original spoke magnet of your e-bike is suitable for this product, we therefore only enclose a thumb screw.