Spare part for badassBox 4The cover fits on all version 4 badassBoxes. The snap locks provide a secure hold.

A distance bush is a spacer that is used whenever either a distance needs to be created between two components or when it is necessary to bridge a distance. If you need a little more distance, we also have a 5 mm Distance bush on offer. Technical data Material Polyrthylene PE Dimensions  5.3 x 15 x 2.5 mm Colorblack

A distance bush is a spacer that is used whenever either a distance needs to be created between two components or when it is necessary to bridge a distance. If you need a little less distance, we also have a 2.5 mm Distance bush on offer. Technical data Material Polyrthylene PE Dimensions  5.3 x 15 x 5 mm Colorblack

Original housing cover with the badass eBikes logo and click closure. Suitable for all badassBoxes Type3.3 with 43mm.

Original housing cover with the badass eBikes logo and click closure. Suitable for all badassBoxes Type3.3 with 46mm.

Original housing cover with the badass eBikes logo and click closure. Suitable for all badassBoxes Type3.4.

badass O-rings made of high-quality EPDM 70 plastic are particularly tear-resistant and UV-resistant. The O-ring secures the badassBox against slipping off the sensor.

The high-quality and universal spoke magnet from Badass eBikes is suitable for all e-bikes. The Badass eBikes spoke magnet is supplied together with a matching wing screw. This allows it to be moved completely without tools within seconds.

The stainless steel screw is solid and has a nonslip surface with a nut in the screw cap that prevents sliding when tightening and loosening the screw. The thumb screw replaces the cross-slot screw of the magnet. Now the magnet can be adjusted without tools. Suitable for Bosch, Brose, Conti and Kalkhoff systems.

The stainless steel screw is solid and has a nonslip surface with a nut in the screw cap that prevents sliding when tightening and loosening the screw. The thumb screw replaces the cross-slot screw of the magnet. Now the magnet can be adjusted without tools. Suitable for Bosch, Brose, Conti and Kalkhoff systems.

The stainless steel screw is solid and has a nonslip surface with a nut in the screw cap that prevents sliding when tightening and loosening the screw. This ensures that the badassBox is quickly mounted and dismounted without using any tools. The thumb screw replaces the screw of the magnet. Now the magnet can be adjusted without tools. Suitable for all standard magnets from Shimano.

The stainless steel screw is solid and has a nonslip surface with a nut in the screw cap that prevents sliding when tightening and loosening the screw. This ensures that the badassBox is quickly mounted and dismounted without using any tools. The thumb screw replaces the screw of the magnet. Now the magnet can be adjusted without tools. Suitable for all standard magnets from Shimano.

The stainless steel screw is solid and has a nonslip surface with a nut in the screw cap that prevents sliding when tightening and loosening the screw. This ensures that the badassBox is quickly mounted and dismounted without using any tools. The thumb screw replaces the cross-slot screw of the magnet. Now the magnet can be adjusted without using tools. Suitable for all standard magnets from Yamaha.

The Turbo Levo 2019 adapter allows the attachment of the pin-shaped sensors that are used, for example on 2019 Turbo Levo and 2020 Turbo Creo from Specialized, so that the badassBox can be used. Installation The integrated sensor is located in the area of the fork-end. To get to the sensor you have to remove the rear wheel. Unscrew the screws of the bracket that secures the sensor to the fork-end. Slide the pin-shaped sensor into the adapter so that only the cable extends out and the snap closes flush with the surface of the adapter. (In the photo on the right, the sensor is not yet fully inserted).

The Universal Adapter is an adapter plate that can be mounted with cable ties at any position on the swingarm. The adapter plate has a recess for an M5 nut for mounting the sensor. A suitably trimmed pad made of self-adhesive elastic foam is included as optional. This pad can be glued to the adapter plate adapter so that there is no risk of scratches at the swingarm. This is how it works: With the nut inserted, the Universal Adapter is attached to the swingarm with the cable ties provided. Please note that an additional spoke magnet is usually required.