badassBox 4 Brose CS-Set

€159.00*

delivery time Immediately available, delivery approx. 1-2 business days*

Free shipping over 160€ in europe
30-day-money-back-warranty
Manufacturer: Badass eBikes GmbH
EAN: 4260475460358
ID: 1141


E-Bike tuning for pedelecs with Brose motor and CS Sensor

Order set for e-bikes with a Brose mid-mounted motor and new pin-shaped sensor in the dropout.


The assembly requires a small conversion. Please read the instructions on the left before ordering!

A quality product designed, engineered and manufactured in Germany.

Scope of delivery

The delivery includes the following parts:

  • one badassBox 4 Brose
  • one badassBox 4 housing cover
  • one AAA battery
  • one spoke magnet with thumb screw
  • one CS Adapter
  • four cable ties

Share me

Share this info on social media

Product information "badassBox 4 Brose CS-Set"
Attention, only the pin-shaped sensor (first picture) is compatible with this variant –
for the normal Brose sensor you need the badassBox 4 Brose

The badassBox 4 Brose CS-Set includes all the parts you need to install the badassBox 4 on your e-bike with Brose mid-mounted drives and pin-shaped sensor:

With the badassBox 4 Brose CS set you not only get all the necessary parts to tune your e-bike in one 'click', but you also save money.

Installation


The pin-shaped CS sensor is located in the area of the dropout.
To get to the sensor you have to remove the rear wheel.


Unscrew the screws of the bracket that secures the sensor to the dropout.


Separate the sensor from the bracket.


Insert the pin-shaped sensor into the adapter so that the flat side of the sensor is aligned with the corresponding recess in the adapter. The sensor must be inserted completely into the adapter, so that only the cable protrudes and the snap closes flush with the surface of the adapter. (In the photo, the sensor is not yet completely inserted).


Attach the adapter to the frame of your bike with the supplied cable ties.


Reinstall the rear wheel.


Slide the badassBox onto the adapter until it clicks into place.


Mount the spoke magnet and align it with the edge of the badassBox housing. That's it. Have fun with your faster e-bike!

€159.00*

delivery time Immediately available, delivery approx. 1-2 business days*

Free shipping over 160€ in europe
30-day-money-back-warranty
Manufacturer: Badass eBikes GmbH
EAN: 4260475460358
ID: 1141


E-Bike tuning for pedelecs with Brose motor and CS Sensor

Order set for e-bikes with a Brose mid-mounted motor and new pin-shaped sensor in the dropout.


The assembly requires a small conversion. Please read the instructions on the left before ordering!

A quality product designed, engineered and manufactured in Germany.

Scope of delivery

The delivery includes the following parts:

  • one badassBox 4 Brose
  • one badassBox 4 housing cover
  • one AAA battery
  • one spoke magnet with thumb screw
  • one CS Adapter
  • four cable ties

Share me

Share this info on social media

firmware-upgrade warning!

Unfortunately, firmware updates/upgrades are at the same time also a gateway for their unwanted features, which take away the choice of tuning or limit it.

We therefore recommend our customers not to carry out any upgrades/updates of the motor firmware or have them carried out at present in order to retain the option of selecting the tuning/original state. This applies in particular in connection with workshop work on your e-bike.

please note

  • The badassBox is not to be used in normal road traffic or in areas regulated by the Road Traffic Act!
  • Use is only permitted on private property or for example for competition or test purposes.
  • Mounting the badassBox may lead to a loss of the bicycle warranty.
  • Use of the badassBox is entirely at your own risk and danger.
  • The manufacturer accepts no liability for damage to property and/or persons arising from inappropriate use of the products.