badassBox 4 Panasonic CS-Set
€164.00*
delivery time Immediately available, delivery approx. 1-2 business days*
Free shipping over 170€ in europe
30-day-money-back-warranty
Manufacturer:
Badass eBikes GmbH
EAN:
4260475461522
ID:
1140
E-Bike tuning for pedelecs with Panasonic motor and CS Sensor
Order set for e-bikes with a Panasonic center motor and new pin-shaped sensor in the dropout.
The assembly requires a small conversion. Please read the installation instructions on the left before you order!A quality product designed, engineered and manufactured in Germany.
Scope of delivery
The delivery includes the following parts:
- one badassBox 4 Universal
- one badassBox 4 housing cover
- one AAA battery
- one spoke magnet with thumb screw
- one CS Adapter
- four cable ties
Share me
Share this info on social media
- badassBox 4
- CS Adapter
- Spoke Magnet with Thumb Screw
Product information "badassBox 4 Panasonic CS-Set"
Attention, only the pin-shaped CS sensor (1st picture) is compatible with this variant –
for the new sensor (2nd picture) you need the badassBox 4 Panasonic 2020, for the normal Panasonic sensor (3rd picture) you need the badassBox 4 Panasonic
for the new sensor (2nd picture) you need the badassBox 4 Panasonic 2020, for the normal Panasonic sensor (3rd picture) you need the badassBox 4 Panasonic
The badassBox 4 Panasonic CS-Set includes all the parts you need to install the badassBox 4 on your e-bike with Panasonic mid-mounted drives and pin-shaped sensor:
With the badassBox 4 Brose CS set you not only get all the necessary parts to tune your e-bike in one 'click', but you also save money.
Installation
The pin-shaped CS sensor is located in the area of the dropout.
To get to the sensor you have to remove the rear wheel.
Unscrew the screws of the bracket that secures the sensor to the dropout.
Separate the sensor from the bracket.
Insert the pin-shaped sensor into the adapter so that the flat side of the sensor is aligned with the corresponding recess in the adapter. The sensor must be inserted completely into the adapter, so that only the cable protrudes and the snap closes flush with the surface of the adapter. (In the photo, the sensor is not yet completely inserted).
Attach the adapter to the frame of your bike with the supplied cable ties.
Reinstall the rear wheel.
Slide the badassBox onto the adapter until it clicks into place.
Mount the spoke magnet and align it with the edge of the badassBox housing. That's it. Have fun with your faster e-bike!
Product information "badassBox 4 Panasonic CS-Set"
Attention, only the pin-shaped CS sensor (1st picture) is compatible with this variant –
for the new sensor (2nd picture) you need the badassBox 4 Panasonic 2020, for the normal Panasonic sensor (3rd picture) you need the badassBox 4 Panasonic
for the new sensor (2nd picture) you need the badassBox 4 Panasonic 2020, for the normal Panasonic sensor (3rd picture) you need the badassBox 4 Panasonic
The badassBox 4 Panasonic CS-Set includes all the parts you need to install the badassBox 4 on your e-bike with Panasonic mid-mounted drives and pin-shaped sensor:
- badassBox 4
- CS Adapter
- Spoke Magnet with Thumb Screw
With the badassBox 4 Brose CS set you not only get all the necessary parts to tune your e-bike in one 'click', but you also save money.
Installation
The pin-shaped CS sensor is located in the area of the dropout.
To get to the sensor you have to remove the rear wheel.
Unscrew the screws of the bracket that secures the sensor to the dropout.
Separate the sensor from the bracket.
Insert the pin-shaped sensor into the adapter so that the flat side of the sensor is aligned with the corresponding recess in the adapter. The sensor must be inserted completely into the adapter, so that only the cable protrudes and the snap closes flush with the surface of the adapter. (In the photo, the sensor is not yet completely inserted).
Attach the adapter to the frame of your bike with the supplied cable ties.
Reinstall the rear wheel.
Slide the badassBox onto the adapter until it clicks into place.
Mount the spoke magnet and align it with the edge of the badassBox housing. That's it. Have fun with your faster e-bike!
€164.00*
delivery time Immediately available, delivery approx. 1-2 business days*
Free shipping over 170€ in europe
30-day-money-back-warranty
Manufacturer:
Badass eBikes GmbH
EAN:
4260475461522
ID:
1140
E-Bike tuning for pedelecs with Panasonic motor and CS Sensor
Order set for e-bikes with a Panasonic center motor and new pin-shaped sensor in the dropout.
The assembly requires a small conversion. Please read the installation instructions on the left before you order!A quality product designed, engineered and manufactured in Germany.
Scope of delivery
The delivery includes the following parts:
- one badassBox 4 Universal
- one badassBox 4 housing cover
- one AAA battery
- one spoke magnet with thumb screw
- one CS Adapter
- four cable ties
Share me
Share this info on social media