badassBox 4 Shimano 2020
E-bike tuning with the badassBox for pedelecs with Shimano motor and integrated Shimano sensor SM-DUE11
Our latest and best e-bike tuning for pedelecs with Shimano motor. Even more robust due to specialcastmass from the automobilindustry. New electronicsdesign for even more reachwidth with a single AAA battery.
A qualityproduct developed by us and manufactured in Germany.
The assembly requires a small conversion. Please read the instructions on the left before ordering!
Please check before ordering whether the cable of your sensor can be pulled out far enough from the fork-end, so that the sensor can be attached to the chainstay in front of the brake disc. Only under this condition, the sensor can be used together with the badassBox.
Scope of delivery
The delivery includes the following parts:
- one badassBox 4 Shimano 2020
- one badassBox 4 housing cover
- one AAA battery
- one cylinder head screw [M3 x 8 (DIN 912)]
- one spoke magnet with thumb screw
- four cable ties
- Contactless e-bike tuning
- Streamlined, registered design for casing
- Patented snap-lock fastening
- Securing feature on the housing
- Patented field enhancement technology
- Auto industry potting compound
- Compatible with electronic gearshift (Di2)
- Doubled quality control
- Made in Germany
- One month money-back guarantee
If the integrated sensor looks like the right picture, it is the older SM-DUE10 from Shimano. Then you need the badassBox 4 Shimano X-Set.
If the Shimano sensor SM-DUE10 (right picture) is easily accessible mounted on your chainstay, you only need a badassBox 4 Shimano 2019.
Badass eBikes proudly presents: the new improved badassBox 4 Shimano 2020
The badassBox 4 is the result of over a year of development work. We've completely redesigned the case, made it slimmer made - which means that there are no longer any installation situations that are too tight. The badassBox runs on one AAA battery (included). Replacement for the supplied battery you get cheap and proverbial on every corner. You can replace it yourself anywhere without tools in no time. We recommend to replace the battery at least once a year at the start of the season. Through our specially developed and patented FEET (Field Enhancement & Elimination Technology), you will get very far with one battery. To protect from moisture and the mechanical mechanical stresses on the wheel, the electronics are glued into the housing with a special potting compound and completely sealed. We develop and manufacture the badassBox completely ourselves. Before and after casting we check each badassBox individually. Customer satisfaction and quality are our top priorities. If you have any questions, don't hesitate to ask – we'll get back to you with an answer straightaway, mostly on the same working day. Due to the high quality and our focus on customer satisfaction, we additionally offer a 1 month money-back guarantee.
In a nutshell
The badassBox is attached to the speed sensor of the e-bike and overrides the 25 km/h speed limit. Remove it and your e-bike is restored to its original state.
Installation
The integrated Shimano sensor is located in the area of the fork-end.
To access the sensor you will need to remove the rear wheel.
Find the position of the integrated sensor in the fork-end of your e-Bike and
loosen the screws that secure the sensor.
Place the sensor in the recess provided on the badassBox.
Attach the sensor to the badassBox using the cylinder head screw provided (you will need a 2 mm Allen key for this). Now you can mount the badassBox together with the sensor by means of cable ties (included) to the chainstay mount.
For initial installation, the supplied spoke magnet must be mounted instead of the original magnet. Our spoke magnet works identically to the original magnet without badassBox, but with badassBox mounted, it is necessary for the function with our patented field amplification.
The spoke magnet must be aligned next to the badassBox. To check the position of the magnet on the bike
when it is stationary, lift the rear of the bike, turn the rear wheel (not the cranks!) and let it run.
Pay attention to the speedometer or
App of your bike. The indicated speed should be steady and slowly drop off as the rear wheel rolls out.
If the spoke magnet touches the badassBox, the spoke magnet must be placed as close as possible to the
badassBox and turned 90°.
be rotated. Done!
How it works
The contactless and wireless badassBox transmits a modified signal in order to override the speed limit of your e-bike – without interfering with the motor's electronic circuitry or software. There's no need to open the motor and there is no risk of damaging it. The badassBox can be fitted in seconds – and just as quickly removed, restoring your e-bike to its former road-legal condition.
For all these advantages, a wrong speed, and values derived from it, are displayed. We recommend the use of GPS-related accessories for a more precise data acquisition of driving data (smartphone, bike computer, etc.).
Technical data
| Dimensions | 61 x 39 x 18 mm |
| Weight | badassBox 28 g |
| including battery 39 g | |
| Battery | 1.5 V AAA battery (IEC R03) |
If the integrated sensor looks like the right picture, it is the older SM-DUE10 from Shimano. Then you need the badassBox 4 Shimano X-Set.
If the Shimano sensor SM-DUE10 (right picture) is easily accessible mounted on your chainstay, you only need a badassBox 4 Shimano 2019.
Badass eBikes proudly presents: the new improved badassBox 4 Shimano 2020
The badassBox 4 is the result of over a year of development work. We've completely redesigned the case, made it slimmer made - which means that there are no longer any installation situations that are too tight. The badassBox runs on one AAA battery (included). Replacement for the supplied battery you get cheap and proverbial on every corner. You can replace it yourself anywhere without tools in no time. We recommend to replace the battery at least once a year at the start of the season. Through our specially developed and patented FEET (Field Enhancement & Elimination Technology), you will get very far with one battery. To protect from moisture and the mechanical mechanical stresses on the wheel, the electronics are glued into the housing with a special potting compound and completely sealed. We develop and manufacture the badassBox completely ourselves. Before and after casting we check each badassBox individually. Customer satisfaction and quality are our top priorities. If you have any questions, don't hesitate to ask – we'll get back to you with an answer straightaway, mostly on the same working day. Due to the high quality and our focus on customer satisfaction, we additionally offer a 1 month money-back guarantee.
In a nutshell
The badassBox is attached to the speed sensor of the e-bike and overrides the 25 km/h speed limit. Remove it and your e-bike is restored to its original state.
- Contactless e-bike tuning
- Streamlined, registered design for casing
- Patented snap-lock fastening
- Securing feature on the housing
- Patented field enhancement technology
- Auto industry potting compound
- Compatible with electronic gearshift (Di2)
- Doubled quality control
- Made in Germany
- One month money-back guarantee
Installation
The integrated Shimano sensor is located in the area of the fork-end.
To access the sensor you will need to remove the rear wheel.
Find the position of the integrated sensor in the fork-end of your e-Bike and
loosen the screws that secure the sensor.
Place the sensor in the recess provided on the badassBox.
Attach the sensor to the badassBox using the cylinder head screw provided (you will need a 2 mm Allen key for this). Now you can mount the badassBox together with the sensor by means of cable ties (included) to the chainstay mount.
For initial installation, the supplied spoke magnet must be mounted instead of the original magnet. Our spoke magnet works identically to the original magnet without badassBox, but with badassBox mounted, it is necessary for the function with our patented field amplification.
The spoke magnet must be aligned next to the badassBox. To check the position of the magnet on the bike
when it is stationary, lift the rear of the bike, turn the rear wheel (not the cranks!) and let it run.
Pay attention to the speedometer or
App of your bike. The indicated speed should be steady and slowly drop off as the rear wheel rolls out.
If the spoke magnet touches the badassBox, the spoke magnet must be placed as close as possible to the
badassBox and turned 90°.
be rotated. Done!
How it works
The contactless and wireless badassBox transmits a modified signal in order to override the speed limit of your e-bike – without interfering with the motor's electronic circuitry or software. There's no need to open the motor and there is no risk of damaging it. The badassBox can be fitted in seconds – and just as quickly removed, restoring your e-bike to its former road-legal condition.
For all these advantages, a wrong speed, and values derived from it, are displayed. We recommend the use of GPS-related accessories for a more precise data acquisition of driving data (smartphone, bike computer, etc.).
Technical data
| Dimensions | 61 x 39 x 18 mm |
| Weight | badassBox 28 g |
| including battery 39 g | |
| Battery | 1.5 V AAA battery (IEC R03) |
E-bike tuning with the badassBox for pedelecs with Shimano motor and integrated Shimano sensor SM-DUE11
Our latest and best e-bike tuning for pedelecs with Shimano motor. Even more robust due to specialcastmass from the automobilindustry. New electronicsdesign for even more reachwidth with a single AAA battery.
A qualityproduct developed by us and manufactured in Germany.
The assembly requires a small conversion. Please read the instructions on the left before ordering!
Please check before ordering whether the cable of your sensor can be pulled out far enough from the fork-end, so that the sensor can be attached to the chainstay in front of the brake disc. Only under this condition, the sensor can be used together with the badassBox.
Scope of delivery
The delivery includes the following parts:
- one badassBox 4 Shimano 2020
- one badassBox 4 housing cover
- one AAA battery
- one cylinder head screw [M3 x 8 (DIN 912)]
- one spoke magnet with thumb screw
- four cable ties